QuantCAD builds a health and fitness smartwatch as a multi-part 3D CAD assembly from one text prompt, in Build auto mode.

Health and fitness smartwatch CAD model

A 36-part health and fitness smartwatch assembly, with case, logic board, battery and haptic engine, built by QuantCAD from one text prompt.

Type
Assembly, 36 parts
Build time
13 minutes 48 seconds
Size
38 x 12 x 45 mm
Credits used
140

STEP AP242 in millimetres. Free to use, including commercially, under CC BY 4.0 with credit to QuantCAD.

The prompt

Build a modern smartwatch that can be used as a health and fitness tracker.

Each build is generated fresh, so the same prompt can give a different result from one run to the next, and results keep improving as QuantCAD is updated.

Built in Build auto mode from this one prompt, with no follow-up prompts, as B-rep solids on the Open CASCADE kernel.

Parts

The 36 parts include:

  • Watch case body
  • Logic board assembly (SiP)
  • Battery pack (Li-ion cell)
  • Taptic engine (linear actuator)

License

Free to use, change and share, including commercially, under the Creative Commons Attribution 4.0 International license (CC BY 4.0). Credit QuantCAD with a link to this page, for example:

"Health and fitness smartwatch CAD model" by QuantCAD (https://quantcad.ai/cad-models/smartwatch), licensed under CC BY 4.0.

STEP files from QuantCAD are exact B-rep solids, ready to send to a machine shop, a supplier or a 3D printer. As with any CAD model, it is good practice, and your responsibility, to check the critical dimensions, tolerances and fits against your requirements before you order parts, so no time or money is wasted.

Build your own smartwatch

Want your own smartwatch, built to your specs? Sign up free and build it with QuantCAD, then iterate, change and update it until it fits. No credit card, nothing to install.

More from the CAD Library

Related use case: Electronics enclosures.

Health and fitness smartwatch CAD Model (STEP, STL) | CAD Library | QuantCAD