
M14 wheel bolt CAD model
An M14 x 1.5 x 45 wheel bolt with an R14 ball seat and a 17 mm hex, built by QuantCAD as one solid part from one text prompt.
- Type
- Single part
- Build time
- 42 seconds
- Size
- M14 x 1.5 thread, 45 mm long, R14 ball seat, 17 mm hex
- Credits used
- 80
STEP AP242 in millimetres. Free to use, including commercially, under CC BY 4.0 with credit to QuantCAD.
The prompt
Build a wheel bolt M14×1.5×45, ball seat R14, property class 10.9, hex 17 mm, zinc-flake coated, tightening torque 160 Nm.
Each build is generated fresh, so the same prompt can give a different result from one run to the next, and results keep improving as QuantCAD is updated.
Built in Build auto mode from this one prompt, with no follow-up prompts, as B-rep solids on the Open CASCADE kernel.
More views
License
Free to use, change and share, including commercially, under the Creative Commons Attribution 4.0 International license (CC BY 4.0). Credit QuantCAD with a link to this page, for example:
"M14 wheel bolt CAD model" by QuantCAD (https://quantcad.ai/cad-models/m14-wheel-bolt), licensed under CC BY 4.0.
STEP files from QuantCAD are exact B-rep solids, ready to send to a machine shop, a supplier or a 3D printer. As with any CAD model, it is good practice, and your responsibility, to check the critical dimensions, tolerances and fits against your requirements before you order parts, so no time or money is wasted.
Build your own wheel bolt
Want your own wheel bolt, built to your specs? Sign up free and build it with QuantCAD, then iterate, change and update it until it fits. No credit card, nothing to install.
More from the CAD Library
Related use case: Mechanical assemblies.




