3D-printable keychain tag built as a solid part in QuantCAD Build auto mode, seen from two angles
The keychain tag from two angles in the QuantCAD 3D viewer.

3D-printable keychain tag CAD model

A 50 x 30 x 4 mm 3D-printable keychain tag with a 5 mm key ring hole, built by QuantCAD as one solid part from one text prompt.

Type
Single part
Build time
52 seconds
Size
50 x 30 x 4 mm, with a 5 mm key ring hole
Credits used
80

STEP AP242 in millimetres. Free to use, including commercially, under CC BY 4.0 with credit to QuantCAD.

The prompt

Create a 3D-printable keychain tag: a solid rounded rectangle, 50 mm long, 30 mm wide, and 4 mm thick. Add one circular through-hole, 5 mm in diameter, near one short end. Keep the front blank, the back flat, and the whole object as one connected piece. Use smooth rounded edges and avoid thin details, text, logos, or extra parts.

Each build is generated fresh, so the same prompt can give a different result from one run to the next, and results keep improving as QuantCAD is updated.

Built in Build auto mode from this one prompt, with no follow-up prompts, as B-rep solids on the Open CASCADE kernel.

License

Free to use, change and share, including commercially, under the Creative Commons Attribution 4.0 International license (CC BY 4.0). Credit QuantCAD with a link to this page, for example:

"3D-printable keychain tag CAD model" by QuantCAD (https://quantcad.ai/cad-models/keychain-tag), licensed under CC BY 4.0.

STEP files from QuantCAD are exact B-rep solids, ready to send to a machine shop, a supplier or a 3D printer. As with any CAD model, it is good practice, and your responsibility, to check the critical dimensions, tolerances and fits against your requirements before you order parts, so no time or money is wasted.

Build your own keychain tag

Want your own keychain tag, built to your specs? Sign up free and build it with QuantCAD, then iterate, change and update it until it fits. No credit card, nothing to install.

More from the CAD Library

Related use case: AI CAD for 3D printing.

3D-printable keychain tag CAD Model (STEP, STL) | CAD Library | QuantCAD