15-inch laptop CAD model
A 46-part 15-inch laptop assembly, with chassis, midframe, keyboard, battery, cooling, circuit boards and hinges, built by QuantCAD from one text prompt.
- Type
- Assembly, 46 parts
- Build time
- 14 minutes 34 seconds
- Size
- 340 x 225 x 20 mm
- Credits used
- 220
STEP AP242 in millimetres. Free to use, including commercially, under CC BY 4.0 with credit to QuantCAD.
The prompt
Build a first draft of a modern 15-inch laptop that I can later iterate on.
Each build is generated fresh, so the same prompt can give a different result from one run to the next, and results keep improving as QuantCAD is updated.
Built in Build auto mode from this one prompt, with no follow-up prompts, as B-rep solids on the Open CASCADE kernel.
Parts
The 46 parts include:
- Base chassis lower case
- Internal magnesium midframe
- Keyboard
- Lithium battery pack
- Dual-fan heat pipe cooling module
- Logic board and side boards
- Hinge assembly
- Fasteners
More views



License
Free to use, change and share, including commercially, under the Creative Commons Attribution 4.0 International license (CC BY 4.0). Credit QuantCAD with a link to this page, for example:
"15-inch laptop CAD model" by QuantCAD (https://quantcad.ai/cad-models/15-inch-laptop), licensed under CC BY 4.0.
STEP files from QuantCAD are exact B-rep solids, ready to send to a machine shop, a supplier or a 3D printer. As with any CAD model, it is good practice, and your responsibility, to check the critical dimensions, tolerances and fits against your requirements before you order parts, so no time or money is wasted.
Build your own laptop
Want your own laptop, built to your specs? Sign up free and build it with QuantCAD, then iterate, change and update it until it fits. No credit card, nothing to install.
More from the CAD Library
Related use case: Electronics enclosures.




